Tools needed
- Microfiber applicator pads
- Painter's masking tape
Materials needed
- Automotive plastic restorer fluid
- Microfiber towels
Step-by-step
- 1
Wash and fully dry the trim so no dirt is trapped underneath.
- 2
Mask off adjacent painted panels to avoid staining.
- 3
Apply a thin, even coat of restorer with an applicator pad.
- 4
Let it penetrate per the label, then buff off any excess with a clean towel.
- 5
Add a second coat on heavily faded areas for a uniform finish.
Common mistakes
- • Applying over a wet or dirty surface
- • Getting restorer on paint and leaving a stain
Maintenance & next steps
Reapply every few months or after repeated washes to maintain the finish.
When to call a professional
For cracked or structurally damaged trim that needs replacement.
Editor's note: This is instructional content for How to Restore Faded Plastic Car Trim and Bumpers. Replace with your own firsthand experience and photos before publishing.
This page contains affiliate links. If you purchase through them, we may earn a commission at no additional cost to you.
