Tools needed
- Spark plug socket wrench
- Screwdriver set
- Shop rags
Materials needed
- Premium fuel stabilizer
- Replacement spark plug
- Small engine air filter
Step-by-step
- 1
Add fuel stabilizer to the tank and run the engine a few minutes to circulate it.
- 2
Either run the tank dry or store it full with stabilizer per the manual.
- 3
Remove and inspect the spark plug; clean or replace it and reset the gap.
- 4
Pop the cover and clean or swap the air filter.
- 5
Wipe down the housing and store in a dry place off the floor.
Common mistakes
- • Storing old untreated gas, which gums up the carburetor
- • Forgetting to disconnect the spark plug while servicing
Maintenance & next steps
Repeat fuel stabilization any time the tool sits unused for a month or more.
When to call a professional
For carburetor rebuilds or persistent starting problems after basic maintenance.
Editor's note: This is instructional content for How to Maintain and Winterize a Gas Leaf Blower. Replace with your own firsthand experience and photos before publishing.
This page contains affiliate links. If you purchase through them, we may earn a commission at no additional cost to you.
